Analysis of the deterioration in Precision during the processing of Semiconductor parts

The reason is that the processing accuracy of the semiconductor parts themselves is poor. Generally speaking, if the dynamic deviation in the middle of the shaft is not adjusted properly during installation and use, or if it changes due to damage to the transmission chain of the shaft transmission system, the precision castings will endanger the accuracy of the parts. Generally speaking, the accuracy of text retrieval caused by such inaccuracies can mitigate the amount of compensation processing. If the deviation is too large or even triggers an alarm, it is necessary to check whether the speed ratio of the AC servo motor is too high.

The reason is that too many operations can also affect the machining accuracy of the machine tool. This might be due to short acceleration and deceleration times and moderately expanded transition times. Of course, it could also be due to the ball screw and AC servo motor. The connection causes loosening.

The reason is that the concentricity deviation caused by the linkage of the two axes, improper adjustment of mechanical equipment, circumferential radial deformation of precision automotive parts, incorrect clearance compensation of the ball screw shaft, or deviation in the precise positioning of the shaft may lead to shaft damage. The precision of precision parts can cause damage.