How to improve the processing efficiency of cnc customized processing of special material parts

The selection of equipment should be reasonable. Rough machining of mechanical parts mainly involves removing most of the machining allowance and does not require precision processing of aluminum parts. Therefore, rough machining should use machine tools with greater power and higher precision, and the process should be in line with the use of machines with relatively high precision. By performing rough and finish machining on different machines, you can fully utilize the capabilities of the equipment to extend the service life of precision machines.

​

2. To ensure the precision of cnc machining and customization of special material parts, the custom aluminum parts factory starts the rough and finish machining of mechanical parts from the best. When processing rough mechanical parts, the cutting volume is large, and the cutting force, clamping force, heat of the workpiece, and the machined surface show obvious work hardening phenomena. The workpiece is under considerable internal stress. If the processing is rough, rough mechanical parts. After continuous operation, due to the redistribution of stress, the accuracy of the parts will be lost very quickly. Mechanical parts processing of some high-precision parts. After rough and finish machining, a low-temperature annealing process or aging treatment should also be arranged to eliminate internal stress.

3. In the processing route of precision parts, heat treatment procedures are often arranged. The position is as follows: Heat treatment processes, such as annealing, normalizing and tempering, are generally arranged in the processing of mechanical parts to improve their machinability.